| Company Name:* |
|
| First Name:* |
|
| Last Name:* |
|
| Mailing Address:* |
|
| City:*
|
|
| State:*
|
|
| Zipcode:*
|
|
| Office Phone:* |
format: (###) ###-####
|
| Fax: |
|
| Email Address:* |
this information will not be given out to third parties |
| Project Name:* |
|
| Project Address:* |
|
| Project City:* |
|
| Project State:* |
|
| Project Zipcode:* |
|
| Roof Height:* |
|
| Module Brand:* |
If your module brand does not appear in the list
above please specify the brand in the additional comments field at
the end of the form |
| Module Model:* |
|
| Module Wattage:* |
|
| Tilt Angle:* |
note: crystalline modules are 5°, 10°, 15°, or 20°;
thin film are 2°- 10° |
| Method of Hold Down:* |
|
| Additional Details: |
Please provide as much information as is readily
convenient for you. The more information that we have about your project
the better we are able to serve you. |
| Module Quantity: |
|
| String Size: |
|
| Prepanelization Service: |
Yes No
|
| Wire Management Clips: |
Yes No
|
| Design Wind Speed: |
(3- Second Gust) at project location per building
code |
| Wind Exposure Category: |
B C D
Exposure B: Ground is covered with
numerous, closely spaced obstructions within 1/2 mile of building
location.
Exposure C: Terrain is flat and generally
unobstructed extending 1/2 miles (.81 KM) or more from the site in any
quadrant
Exposure D: Terrain is flat and unobstructed extending
1 mile (1.62 KM) from building location in non-hurricane
regions |
| Building Occupancy Category: |
(per building code) |
| Minimum Setback: |
|
| Roof Slope: |
1/4:12 pitch assumed. If not, approximate roof
pitch |
| Roofing Information: |
Single-ply: Consist of a flexible
membrane that resists displacement by the use of ballast, mechanical
attachment, or adhesion to a roof deck (EPDM, PVC).
Built-Up: Build-Up-Roofs (BUR) are
multiple layers of felt with inter-ply mopping of asphalt or coal tar
assembled in the field to "build up" a finished roof assembly. A heavy
application of asphalt or coal tar, which is then covered with gravel, is
the typical surface finishing to these assemblies, primarily for
fireproofing and ultra violet protection.
Metal Roof: Typically steel,
aluminum or copper metal roofing. Most metal roofs are installed in
sheets, but can also be installed in shingles, the most popular being
aluminum or copper.
Foam Roof: over a metal or
concrete deck. |
| Roof Manufacturer: |
|
| Roof Type: |
|
| Other Roof Information: |
|
| Type of Decking: |
|
| Framing System: |
|
| Roof Loading Information: |
Please provide any roof loading information such as limitations.
Distributed Weight in lbs psf
Point Loading in lbs psf
Design Roof Dead Load, Design Roof Live Load, Any other loading limitations |
| Additional Comments: |
(e.g. Other Module Brand, Project Criteria, Information on building,
Roof, etc.) |
|
|
|
|
|
|
|
|
|
